18岁末年禁止观看试看一分钟

1.0 Intelligent Campus Network Solution 2.0 IDC Data Center Network Solution 3.0 Enterprise Cloud Solutions 4.0 Overall Information Security Solution 5.0 Smart Wireless Total Solution 6.0 HD Video Conference Solution 7.0 IDC Computer Room Construction Solution 8.0 Intelligent Weak Current Solution 9.0 Intelligent Building Solution 10.0 Intelligent Management Center Overall Solution
solution

1.0 Intelligent Campus Network Solution

2.0 IDC Data Center Network Solution

3.0 Enterprise Cloud Solutions

4.0 Overall Information Security Solution

5.0 Smart Wireless Total Solution

6.0 HD Video Conference Solution

7.0 IDC Computer Room Construction Solution

8.0 Intelligent Weak Current Solution

9.0 Intelligent Building Solution

10.0 Intelligent Management Center Overall Solution

9.2 Smart Lighting Solution
9.2 Smart Lighting Solution
Date: 2018-07-13


One,     

1.    Smart Lighting Introduction

The intelligent buildings in the 21st century have higher and higher requirements for lighting. Not only are they required to provide comfortable, green lighting, but different occasions require different lighting environments. The traditional lighting control generally uses a manual switch control. It is difficult to achieve the above requirements, and the wiring is very complicated and the operation is very tedious. With the increase of user requirements and technological progress, traditional lighting control has gradually been replaced by intelligent lighting control because many problems cannot be solved, which has become a trend.



The technology of the intelligent lighting control system is continuously updated with the development of modern building technology to adapt to the layout of various building structures and the selection of different lamps to achieve a variety of control modes. BA 、安保、消防等相互连接完成系统集成功能。 Since this is an open system, the standard interface can be easily connected to other systems such as BA , security, fire protection, etc. to complete the system integration function. For example, during the commute period, all the entrance lighting is turned on, some lighting is turned on at ordinary times, and the night mode is turned on late at night. Outdoor landscape lighting automatically runs according to time: According to the requirements of flood light, the lighting control system is designed. The daily mode is realized through intelligent management of the control room and the control panel of each area to realize intelligent humanized management.

 

2.    Overall design ideas and principles

n   Feasibility and adaptability

Ensure technical feasibility and system adaptability

n   Practical and economical

Implement comprehensive application and adhere to the principles of practicality and economy

n   Advanced and mature

We must not only adopt advanced concepts, technologies and methods, but also pay attention to the relatively mature structure and equipment. Not only can it reflect today's advanced level, but it also has development potential and can adapt to development in the next few years.

n   Open and standard

In order to meet the needs of the selected technology and equipment's cooperative operation ability, the long-term effects of system investment, and the continuous development of system functions. We must pursue openness and standardization of the system.

n   Reliability and stability

While considering new technologies and openness, we should also start from the aspects of system structure, technical measures, equipment performance, and system management to ensure the reliability and stability of system operation and achieve the maximum mean time between failures.

n   Security and confidentiality

It is necessary to consider the full sharing of information resources and pay more attention to the protection and isolation of information. Therefore, the system should fully take different measures for different applications and different network communication environments, including system security mechanisms and data access permission control.

n   Scalability and maintainability

In order to meet the needs of system changes, full consideration must be given to achieving system expansion and maintenance with the simplest method and lowest investment.

3.    An Introduction

n   Illumination control


C-BUS 光照传感器和亮度控制器将某一控制区域(如大堂)的亮度设定为一个恒定的值,可根据室外光线的变化和窗帘的开关自动调节灯光的亮度,使受控区域拥有舒适的照明环境。 The brightness of a control area (such as the lobby) is set to a constant value through the C-BUS light sensor and brightness controller. The brightness of the light can be automatically adjusted according to the change of outdoor light and the opening and closing of curtains, so that the controlled area has Comfortable lighting environment.

n   remote control

系统可以通过电话、互联网进行远程控制系统中连接的灯光、电器等所有设备,便于对系统进行远程管理。 The C-BUS system can remotely control all the equipment such as lights and electrical appliances connected to the system through telephone and Internet, which is convenient for remote management of the system.

n   Dimming control

The system enhances the decoration level of the building to the greatest extent through the dimming function in the room. The dimming switch function is in line with the physiological adaptability of the eyes to the light, while extending the life of the light source and achieving energy saving effects.

n   time control


C-BUS 系统会依次打开室外主照明、泛光、景观照明,在新一天的阳光到来之前自动将它关闭。 According to the actual application requirements, it is set to automatically control lights, electrical appliances and other equipment in chronological order. For example, at night, the C-BUS system will turn on the outdoor main lighting, flood light, and landscape lighting in order. It closed.

n   Induction lighting


In some areas (such as corridors, bathrooms, stairs), the system uses the infrared sensing lighting function. When someone enters these areas, the lighting system can be automatically turned on, which avoids the trouble of holding and holding the object in hand or turning on and off when in a hurry. Reflects the advantages of intelligence.

n   Electrical monitoring


NEO 面板可实时监控灯光回路或电器开关状态。 The touch screen or NEO panel configured by the system can monitor the lighting circuit or electrical switch status in real time. NEO 面板可通过指示灯的颜色或亮暗监视回路的开关状态或通过软件进行设定,在触摸屏上可通过系统设计的楼层平面图的动态电气图标察看房间内受控的电器状态。 On the NEO panel, you can monitor the switch status of the circuit by the color of the indicator light or light or dark or set by software. On the touch screen, you can check the status of the controlled electrical appliances in the room through the dynamic electrical icons on the floor plan of the system design.

n   System software programming management

NEO 面板的每个按键的场景,液晶屏内楼层的平面图及灯具位置或管理功能等。 The system uses programming management software to program all operating devices, such as changing the scene of each key of the NEO panel, the floor plan of the LCD screen, the location of the lamps, or management functions. Can be customized according to different needs.

n   Integrated control with other systems

空调 , - 视频 , 消防系统 Integration with other building systems for easy access and control- air conditioning , audio - video , fire protection systems

, 比如 : Integrated with the control systems of most building management system companies , such as :

Siemens, Johnson, Honeywell

Concept Security & Access Control

AMX, Crestron

RS232 或以太网接口 Provide RS232 or Ethernet interface

 

 

 


© 2016 Guangzhou Mingchuang Network Technology Co., Ltd. All rights reserved Technical support: 35